SuzukiSavage.com /cgi-bin/YaBB.pl General Category >> Rubber Side Down! >> Re: S40 Sissy Bar /cgi-bin/YaBB.pl?num=1179577081 Message started by Savage Librarian on 05/19/07 at 10:15:31

Title: Re: S40 Sissy Bar Post by Savage Librarian on 05/19/07 at 10:15:31 I'm not aware of a taller sissybar for the LS650...but it's fairly simple to make the factory one taller.  If you pull the stock pad off of it, you can mount your own in it's place.  If you have a piece plywood, some foam (if nothing else, buy a $20 memory foam pillow at wallyworld), and some vinyl, you can make your own to whatever specs you want, then just put it back on with screws through the pre-existing holes in the sissy bar.

Title: Re: S40 Sissy Bar Post by verslagen1 on 05/19/07 at 11:33:12 If you use plywood, make sure the grain runs verticle.   ;D

SuzukiSavage.com » Powered by YaBB 2.2! YaBB © 2000-2007. All Rights Reserved.