|
SuzukiSavage.com
/cgi-bin/YaBB.pl General Category >> Rubber Side Down! >> leaking speed case seal /cgi-bin/YaBB.pl?num=1177885386 Message started by SavageRichie on 04/28/07 at 15:17:41 |
|
Title: leaking speed case seal Post by SavageRichie on 04/28/07 at 15:17:41 team, what is the current school of thought on o ring replace size for the original black seal the goes onto the speed cable and screws into the case? Thanks |
|
Title: Re: leaking speed case seal Post by Kropatchek on 04/29/07 at 15:27:53 SavageRichie wrote:
Any "O"- ring that fits the inside of the curled nut will do the job. Current and oldfasioned thoughts! If you lost the original, look under the startermotor. |
|
Title: Re: leaking speed case seal Post by justin_o_guy on 04/29/07 at 15:55:08 I've lost the original, Ive lost the replacement. I don't sweat it anymore. I grab an Oring that's too long but about the right thickness, cut it at an angle & wrap it into the threaded cup that holds it, figure wher to cut it so it overlaps & cut it accordingly. It doesnt leak. I've done that 2 or 3 times, never leaked. Just need a good pair of diagonal cutters a pair O eyeballs. |
|
Title: Re: leaking speed case seal Post by thumperclone on 04/29/07 at 19:12:27 local hdwre store carries them but most SUZUKI ships dont.....took me losing them twice to find them at tru value ....just bring the cable with U.. |
|
Title: Re: leaking speed case seal Post by Fido_the_Cat on 04/29/07 at 19:23:39 Kropatchek wrote:
What made you look there? There are plenty of other places it could be. Sounds like the voice of experience. |
|
Title: Re: leaking speed case seal Post by Savage_Rob on 04/30/07 at 03:30:28 Fido_the_Cat wrote:
That's the black hole of lost small parts... especially the brass washer/spacer from the main jet. |
|
SuzukiSavage.com » Powered by YaBB 2.2! YaBB © 2000-2007. All Rights Reserved. |