SuzukiSavage.com
/cgi-bin/YaBB.pl General Category >> Rubber Side Down! >> Forks /cgi-bin/YaBB.pl?num=1177370104 Message started by cFLOW on 04/23/07 at 16:15:04 |
Title: Forks Post by cFLOW on 04/23/07 at 16:15:04 Hey Everyone I need to Know what the forks on a 97 savage are made of ? I think they are cast steel but maybe alu. Not sure any help would be great |
Title: Re: Forks Post by vroom1776 on 04/23/07 at 16:20:56 what are you planning on doing? |
Title: Re: Forks Post by cFLOW on 04/23/07 at 16:44:15 well if they are steel i'll powder coat. if alu. I'll Use aluminum black for guns. I Think it will very cool in aluminum black. |
Title: Re: Forks Post by serowbot on 04/23/07 at 18:16:00 try a magnet |
Title: Re: Forks Post by smokin_blue on 04/23/07 at 18:55:34 The lowers (outer tubes are aluminum) the inner tubes are steel. I have a bent pair from a '97 I can sell you cheap for parts if you need some parts to play with. |
Title: Re: Forks Post by cFLOW on 04/23/07 at 20:18:38 I didnt even think to try the magnet, Smokin thanks for the info I 'll let you know if about the forks. |
SuzukiSavage.com » Powered by YaBB 2.2! YaBB © 2000-2007. All Rights Reserved. |