SuzukiSavage.com - Print Page

SuzukiSavage.com
/cgi-bin/YaBB.pl
General Category >> Rubber Side Down! >> Foot peg adapter
/cgi-bin/YaBB.pl?num=1177187279

Message started by Scottwerty on 04/21/07 at 13:27:59

Title: Foot peg adapter
Post by Scottwerty on 04/21/07 at 13:27:59

Just wanted to know if any of the Kuryakyn peg adapters would fit the savage. seen some that look like they would but cant find a cross ref

Title: Re: Foot peg adapter
Post by Max_Morley on 04/21/07 at 19:42:01

I've not be able to find a listing in the current catalog. the did have a floor board listing 4 years ago in the J & P catalog, but I didn't buy then and even though the list it when you call they said it is wrong Max

Title: Re: Foot peg adapter
Post by Scottwerty on 04/23/07 at 14:07:23

Found a site that says it it has an adapter
http://www.meancycles.com/Home.asp?PartID=197358&AccCategoryID=2423&AccCategoryTypeID=0&BikeModelID=0&ManufacturerID=0&BikeType=Cruiser&CompanyID=0

Title: Re: Foot peg adapter
Post by Scottwerty on 04/23/07 at 14:46:40

Just sent them an e-mail asking about the adapter i think it may be the standard H-D peg with an adjustable stop who knows ::)

Title: Re: Foot peg adapter
Post by praetorian on 04/23/07 at 16:17:41

Yeah... I was looking at it... the application list doesn't include the Savage/S40.... oh well

Title: Re: Foot peg adapter
Post by verslagen1 on 04/23/07 at 16:52:49

same site for s40 so it says

http://www.meancycles.com/Home.asp?PartID=211498&AccCategoryID=2423&AccCategoryTypeID=0&BikeModelID=5622&ManufacturerID=0&BikeType=Cruiser&CompanyID=0

Title: Re: Foot peg adapter
Post by Scottwerty on 04/23/07 at 17:18:26

hah, they already changed the page after my email! Fast techies. this is what they wrote back with
( Hello Scott,
Thanks for the inquiry.
Don't know why it had that application, because Kuryakyn application does not
mention your bike model:

http://www.kuryakyn.com/products.asp?bn=Metric&ci=3145

So I don' think they will work.
Regards,
JC )

Guess they had it wrong and fixed it. Oh-Well, still the HD mount with the adjustable stop should help as long as what you drill out isn't where the srew sets into

Title: Re: Foot peg adapter
Post by Jack_650 on 04/24/07 at 07:22:55

I bought a cheap set of harley mini floorboards to put on my 650. The hole that our allen wrenchable screw that holds them in place goes through had to be drilled out to a slightly larger size was the only change I needed to do. But, and it's a big but in this case, the stock position for the Harley boards puts them at an angle (front to back tilt) when mounted on the Suzi-Q. The boards I got had a second hole for mounting the boards at a 15 degree angle for those who want to mount them up on crash bars or whatever. This is the hole you use if you want floorboards that are parallel to the ground when you ride. This hole does not go through where the peg meets the bike, but rather where the board met the peg adaptor. If your peg screws into this peg adator your looking at you might could use a washer type spacer to get the peg to be at the orientation you want. If there are no "top" and "bottom" sides to your choice of pegs then it shouldn't matter.

Jack