SuzukiSavage.com
/cgi-bin/YaBB.pl General Category >> Rubber Side Down! >> Brake Caliper Upgrade w/ Stock Forks? /cgi-bin/YaBB.pl?num=1174580912 Message started by vroom1776 on 03/22/07 at 09:28:32 |
Title: Brake Caliper Upgrade w/ Stock Forks? Post by vroom1776 on 03/22/07 at 09:28:32 Hey all, I'd like to upgrade the front caliper to at least 2 pistons, prefereably 4 or even 6 (so I can do stoppies ::) ... kidding) while still using the stock forks. I know lancer has or will put on some nissin brakes (http://suzukisavage.com/cgi-bin/YaBB.pl?board=RubberSideDown;action=display;num=1157053652;start=0#0), but he's using ceriani forks, and London thing has used brembos, but again w/ ducati forks (http://suzukisavage.com/cgi-bin/YaBB.pl?board=RubberSideDown;action=display;num=1128459105;start=40#40)... WD says I'm out of luck, though (http://suzukisavage.com/cgi-bin/YaBB.pl?board=RubberSideDown;action=display;num=1117149656;start=4#4)... Any thoughts? |
Title: Re: Brake Caliper Upgrade w/ Stock Forks? Post by Greg_650 on 03/22/07 at 12:49:46 Stoppies on a Savage. Now, that could make you famous, or dead. |
Title: Re: Brake Caliper Upgrade w/ Stock Forks? Post by vroom1776 on 03/22/07 at 15:00:09 well, looking at the bikes in the lot at work, the caliper off of a fullsize HD and a newer CBR 600 (nissin) appear as though the mounting holes are the same separation... |
SuzukiSavage.com » Powered by YaBB 2.2! YaBB © 2000-2007. All Rights Reserved. |