SuzukiSavage.com
/cgi-bin/YaBB.pl General Category >> Rubber Side Down! >> chopper fenders /cgi-bin/YaBB.pl?num=1167957027 Message started by john1652 on 01/04/07 at 16:30:27 |
Title: chopper fenders Post by john1652 on 01/04/07 at 16:30:27 here are some fenders for that custom bobber look if you are interested john. CUSTOM CHOPPER FLAT FENDER 8 1/2 WIDE TIRE BOBBER (http://cgi.ebay.com/ebaymotors/CUSTOM-CHOPPER-FLAT-FENDER-8-1-2-WIDE-TIRE-BOBBER_W0QQitemZ180068889715QQihZ008QQcategoryZ35561QQrdZ1QQcmdZViewItem#) |
Title: Re: chopper fenders Post by Five_Points on 01/05/07 at 08:59:40 8.5" wide might be too wide to fit (unless you don't mind cutting notches out to work it around the frame. I'm in the process right now of installing a bobber style fender. It is 7.25" wide and barely fits. |
Title: Re: chopper fenders Post by john1652 on 01/05/07 at 10:40:24 well if you go to their web site they offer lots of different sizes just thought i would put this here in case someone was interested. thanks john |
Title: Re: chopper fenders Post by SeeAPierce on 01/05/07 at 15:36:27 I used an 8" and did have to cut out metal for the right shock and belt on the left...not to bad... |
SuzukiSavage.com » Powered by YaBB 2.2! YaBB © 2000-2007. All Rights Reserved. |