SuzukiSavage.com - Print Page

SuzukiSavage.com
/cgi-bin/YaBB.pl
General Category >> Rubber Side Down! >> clutch/primary gear nut sizes ?
/cgi-bin/YaBB.pl?num=1167738403

Message started by franch on 01/02/07 at 03:46:43

Title: clutch/primary gear nut sizes ?
Post by franch on 01/02/07 at 03:46:43

so i finally took the head cover off to do the plug-cap leak and the cam chain and tensioner jobs. while i'm there i will put 4 washers behind the clutch springs.
anyway anybody know the sizes of the sockets i need to remove the big clutch nut and the primary gear drive nut so i can get at the bottom of the cam chain ?
muchas gracias

Title: Re: clutch/primary gear nut sizes ?
Post by Kropatchek on 01/02/07 at 05:41:35

Clutch nut 32 mm

Primairy drive nut 30 mm.

Note : the primairy drive nut has LEFTHAND tread, so CW to undo

Greetz
Kropatchek ;D

Title: Re: clutch/primary gear nut sizes ?
Post by franch on 01/02/07 at 07:09:41

thanks, thats what i love about the people here !
i asked and within 2 hours got the answer

Title: Re: clutch/primary gear nut sizes ?
Post by Greg_650 on 01/02/07 at 10:28:49

Be sure to use the torque specs on the bolts for the clutch springs.

The bolts can break if over torqued.

Title: Re: clutch/primary gear nut sizes ?
Post by franch on 01/02/07 at 11:36:52

ok i'll do that.