SuzukiSavage.com - Print Page

SuzukiSavage.com
/cgi-bin/YaBB.pl
General Category >> Rubber Side Down! >> chopper style sprung solo seat
/cgi-bin/YaBB.pl?num=1167700765

Message started by Five_Points on 01/01/07 at 17:19:25

Title: chopper style sprung solo seat
Post by Five_Points on 01/01/07 at 17:19:25

I've been looking at some chopper style sprung solo seats and was wondering how those of you that have them mounted them up? Anyone got any tips and or pics for instaling one of these on our bikes?

Title: Re: chopper style sprung solo seat
Post by justin_o_guy on 01/01/07 at 18:14:59

You might go have a look at the "Posters Pictures" thread, abiyt the third or fourth from the top. I think I saw a sprung solo in there..

Title: Re: chopper style sprung solo seat
Post by SeeAPierce on 01/02/07 at 09:32:41

First, buy the seat you want, then sit it on top of your bike to see what points are available to mount to...

For my seat, I bent 2 pieces of strap steel into almost an angle like < and >.

I drilled holes to bolt them to the original seat brackets, so they bent over the top of the frame. I then drilled holes into the brackets to bolt the springs to. The front of the seat is mounted to a bracket made specifically for spring seats that I bought online that bolts right up to the mounting at the tank...I'll try to find that link for you...

http://suzukisavage.com/cgi-bin/YaBB.pl?board=RubberSideDown;action=display;num=1166901034