SuzukiSavage.com /cgi-bin/YaBB.pl General Category >> Rubber Side Down! >> Belt mods /cgi-bin/YaBB.pl?num=1166730863 Message started by Phelonius on 12/21/06 at 11:54:23

Title: Belt mods Post by Phelonius on 12/21/06 at 11:54:23 Are any different final drive ratios available by changing the number of teeth on the belt sprockets? Will a Volkswagon old style tire fit on the rear rim and up under the fender? ( Sidecar usage.) I would like an automotive type tire to put more square inches on the surface and increase tire milage on a machine that will always carry a sidecar. I am concerned about clearance under the fender and swingarm. If the outside diameter is too great, I would want to change to a lower final drive ratio. On a chain drive system, no problem. Just wondering if different ratios are available with belt. Phelonius

Title: Re: Belt mods Post by hutch on 12/21/06 at 12:42:56 The Savage has had the same size pulleys from the start, no matter 4 or 5 speed. you are stuck with what you got. See BeltvsChain post, or Belt Pulley post. All the info is there.

SuzukiSavage.com » Powered by YaBB 2.2! YaBB © 2000-2007. All Rights Reserved.