SuzukiSavage.com - Print Page

SuzukiSavage.com
/cgi-bin/YaBB.pl
General Category >> Rubber Side Down! >> Solo Conversion
/cgi-bin/YaBB.pl?num=1153100916

Message started by ratdog472 on 07/16/06 at 18:48:36

Title: Solo Conversion
Post by ratdog472 on 07/16/06 at 18:48:36

For those of you that have made the solo switch where did you relocate the regulator under the passenger seat?

Title: Re: Solo Conversion
Post by Brewbrother on 07/16/06 at 18:51:50

relocated to the air box is my understanding. BTW, Your sig is funny as He*ll.

Title: Re: Solo Conversion
Post by WD on 07/16/06 at 19:50:03

Pull the right side air box door off and throw it away. Cut the central rib out of the air box snorkel. Stuff regulator into snorkel. Been that way since 1999...
-WD

Title: Re: Solo Conversion
Post by sluggo on 07/17/06 at 01:06:20

i mounted it right back on the rear fender, just a little lower. finally here's a close up of the area.

firefox users refresh the page to unblock image.

http://images.kodakgallery.com/photos1577/7/40/83/74/49/0/49748340709_0_ALB.jpg

the sheet metal flap cover the area up.

Title: Re: Solo Conversion
Post by yantis_flash on 07/17/06 at 06:45:38

I relocated mine to the muffler bracket and extended the wiring. :)

Title: Re: Solo Conversion
Post by azjay on 07/17/06 at 08:17:26

i had to relocate debby's regulator for the sportster seat conversion, i screwed it down to the frame cross member just above the air snorkel (ensures a good ground), and have the rest of the wires and connectors stuffed down along side and across the top of the air box, which is why i opted for the swiss cheese mod on the air box door. i wasn't impressed enough with the stock air filter seal to eliminate the door in the desert, although i certainly considered it.

Title: Re: Solo Conversion
Post by vroom1776 on 07/17/06 at 09:34:14

Bolted it to the bottom of my metal seat/fender.

http://w1.bikepics.com/pics/2005%5C09%5C26%5Cbikepics-436130-800.jpg

Seat acts as a heat sink.

Sorry, kinda dark...