SuzukiSavage.com
/cgi-bin/YaBB.pl General Category >> Rubber Side Down! >> Re-tapping the frame at fender mounts /cgi-bin/YaBB.pl?num=1152817588 Message started by vroom1776 on 07/13/06 at 12:06:28 |
Title: Re-tapping the frame at fender mounts Post by vroom1776 on 07/13/06 at 12:06:28 hey gang, Anyone retap the frame where the fender mounts to it, specifically the upper ones? (Sluggo?) The threads do not go all the way through and I want to come in from the top... I have the bolts, so I can get the correct thread size... Any experience here appreciated. Thanks, V |
Title: Re: Re-tapping the frame at fender mounts Post by sluggo on 07/13/06 at 13:25:32 i took the easy way out, i went and found hardened botls just a tad smaller than the hole and just ran em through. |
Title: Re: Re-tapping the frame at fender mounts Post by vroom1776 on 07/13/06 at 14:16:56 That's not a bad idea! Hmm, okay, I can see spring mounting my "seat" that way... or not! Thanks! |
Title: Re: Re-tapping the frame at fender mounts Post by steelwolf on 07/13/06 at 14:52:50 vroom1776 wrote:
For a minute there I thought maybe that seat pan of yours had finally gotten the best of you. ;D |
SuzukiSavage.com » Powered by YaBB 2.2! YaBB © 2000-2007. All Rights Reserved. |