SuzukiSavage.com
/cgi-bin/YaBB.pl General Category >> Rubber Side Down! >> Saddle Bag Supports /cgi-bin/YaBB.pl?num=1152715308 Message started by Rawhide on 07/12/06 at 07:41:48 |
Title: Saddle Bag Supports Post by Rawhide on 07/12/06 at 07:41:48 I recently purchased a pair of Suzuki S40 saddlebag supports to install on an 01 Savage. The bolts came with it. The front bolt is too long and I think the back one is too short. Also it seems like the bolts heads will be too close to the tire when the fender goes down while riding. I tried to install them like pictures in the part books. Any help will be appreciated! Thanks! Rawhide |
Title: Re: Saddle Bag Supports Post by Dragon King on 07/12/06 at 08:29:46 maybe you got the front and rear bolts reversed if front is too long and rear to short. mine is older so don't know how much I can help.as far as the bolts hitting no problem that I know of |
Title: Re: Saddle Bag Supports Post by MacAttack on 07/12/06 at 08:40:55 I too think you have the front/rear bolts switched. I mounted a set on our '06 S40 and it was just fine. |
Title: Re: Saddle Bag Supports Post by MacAttack on 07/12/06 at 08:41:56 Oh wait I didn't notice you had an '01. If it is different than the S40, you might need a trip to the hardware store >:( |
Title: Re: Saddle Bag Supportsnd Sissy bar on my S40. Post by Veritas on 07/12/06 at 15:00:39 You will need a trip to the hardware store. The fender rails on the Savage are narrower than those on the S40. I found this out when I tried to mount Savage rails and sissy bar on my S40. The supports will work. You just need the right length bolts... |
Title: Re: Saddle Bag Supports Post by Rawhide on 07/12/06 at 16:13:36 Thanks for the info.! I need to visit my friends bolt bin. Just found this website yesterday and sure glad I did!! |
SuzukiSavage.com » Powered by YaBB 2.2! YaBB © 2000-2007. All Rights Reserved. |