SuzukiSavage.com
/cgi-bin/YaBB.pl General Category >> Rubber Side Down! >> back rest /cgi-bin/YaBB.pl?num=1151586903 Message started by ST1 on 06/29/06 at 06:15:03 |
Title: back rest Post by ST1 on 06/29/06 at 06:15:03 I got my protac backrest a few days ago and what a world of difference it makes. Just mad I waited as long as I did to get one. I wasn't real impressed with the mounting bracket though. The paint flaked off easily when I tightened the nut down and I can still move the back rest back and forth without much trouble. Also there are no set screws to hold the rest into the mounting bracket. I guess the brackets are the only problem I have with it. For 120 clams I expected the whole package to be quality work. |
Title: Re: back rest Post by thumperclone on 06/29/06 at 09:18:28 my bracket move also not a proplem..the bottom of the brackets have a hole5/16 or larger..i drilled thbottom of the backrest arm and tapped with a 1/4 X20 ..got one side done and broke the tap off in the other so just one bolt ,holds just fine...great back saver |
SuzukiSavage.com » Powered by YaBB 2.2! YaBB © 2000-2007. All Rights Reserved. |