SuzukiSavage.com
/cgi-bin/YaBB.pl General Category >> Rubber Side Down! >> Seat mod? /cgi-bin/YaBB.pl?num=1151097376 Message started by Veritas on 06/23/06 at 14:16:16 |
Title: Seat mod? Post by Veritas on 06/23/06 at 14:16:16 So yeah, I've taken my seat apart and such. It is different on the S40! ??? I put bigger rubber spacers and longer bolts, but I'm noticing the seat doesnt bolt in the front. A little metal clip slides under the bracket at the back of the gas tank. So, putting the extra space did nothing but make the front of my seat a bit loose because the metal clip didn't fit all that snug underneath the bracket. Any idea how to do the seat mod on a S40? |
Title: Re: Seat mod? Post by sluggo on 06/23/06 at 14:50:28 trial and error ;D |
Title: Re: Seat mod? Post by serowbot on 06/23/06 at 23:09:11 I noticed on my 97' that the #4 rubber washers prevented the front seat mount from going full forward, so I cut 2 bits of 1/2 plastic plumbing tubing and used that. Mine is 1 3/4" raised, very comfortable. |
Title: Re: Seat mod? Post by thumperclone on 06/24/06 at 21:17:51 was look to do my s40 also havent yet but looks like you have to raise the side mounting points also..then theres the back..good luck!! 8) |
SuzukiSavage.com » Powered by YaBB 2.2! YaBB © 2000-2007. All Rights Reserved. |