SuzukiSavage.com
/cgi-bin/YaBB.pl
General Category >> Rubber Side Down! >> grips & other accessories for my baby
/cgi-bin/YaBB.pl?num=1150255276

Message started by tallahasseeS40 on 06/13/06 at 20:21:16

Title: grips & other accessories for my baby
Post by tallahasseeS40 on 06/13/06 at 20:21:16

i was looking at some new toys, and i was wondering if any of you have tried them and how they work. ive included some links from cruiser customizing.com so you know what im talking about.


1) iso grips (http://www.cruisercustomizing.com/detail.cfm?model_ID=103&Category_ID=10&manufacturer_ID=16&product_ID=633&sblid_name=Kuryakyn_Universal_Iso_Grips_for_Suzuki_Boulevard_S40)

do they really dampen vibration as much as people say?  have you installed them on your savage?
what is our handlebar diameter anyway?

2) green light trigger (http://www.cruisercustomizing.com/detail.cfm?model_ID=103&Category_ID=5&manufacturer_ID=262&product_ID=1707&sblid_name=Green_Light_Stuff_Green_Light_Trigger_for_Suzuki_Boulevard_S40)

do these really work?  are they a gimmick?

3) intercom system

has anybody used any intercom systems?  im looking for a cost effective helmet to helmet system for me and my passenger.  

4)  tach (http://www.cruisercustomizing.com/detail.cfm?Category_ID=65&manufacturer_ID=167&product_ID=6786&model_ID=103)

do these work well? i know on this bike its a novelty

5)  anything else that i need?  

Title: Re: grips & other accessories for my baby
Post by Kropatchek on 06/14/06 at 01:27:06

Has been done . ;D ;D
Search the forum and ALL your questions will be answered.
The handlebar dia. = 1"
Greetz
Kropatchek 8)

Title: Re: grips & other accessories for my baby
Post by GA_Wolf on 06/14/06 at 11:38:56

I like the Baron's Tach too...only problem is on the 06's is that there is part of the riser that runs between uprights on the underside of the bar.  So the round 1" probably won't fit over it.  Anybody got any suggestions or tips on how they got around it?

Title: Re: grips & other accessories for my baby
Post by Redfire_05GT on 06/14/06 at 19:30:32


GA_Wolf wrote:
I like the Baron's Tach too...only problem is on the 06's is that there is part of the riser that runs between uprights on the underside of the bar.  So the round 1" probably won't fit over it.  Anybody got any suggestions or tips on how they got around it?
'05's are in the same boat; I haven't gotten around it yet but will let you know when I do...


Title: Re: grips & other accessories for my baby
Post by Jim_R on 06/15/06 at 12:05:41

I have had the grips before and they were one of the best things I ever bought for my late dearly departed Savage.  I think it took like 99% of the vibration out of my hands honest.

The green light trigger is a gimmick.  No magnet is going to trip a green light (or any electrical device).

The lights usually are detected by a large presence of metal, namely a car.  

http://www.howstuffworks.com/question234.htm


here is a link to show how they work.

Only thing I ever heard (which is absurd) is to lower ur bike on the ground a few inches from the road and it detect it.  Uh I aint dropping my bike for a signal.  Ill just run it next cycle hehe.  

Maybe if it was a 10 speed I would lower the front wheel to it but not a bike.

Title: Re: grips & other accessories for my baby
Post by GA_Wolf on 06/16/06 at 08:33:30

Was wondering if a larger bar diameter mount would grip around the bar and the brace under it..for the Baron's Tach.  Wonder if an 1 1/4 " or 1 1/2" mount will go around the whole settup....will try to remember to measure this evening.

SuzukiSavage.com » Powered by YaBB 2.2!
YaBB © 2000-2007. All Rights Reserved.