SuzukiSavage.com
/cgi-bin/YaBB.pl General Category >> Rubber Side Down! >> What size? /cgi-bin/YaBB.pl?num=1149597541 Message started by Krowl on 06/06/06 at 05:39:01 |
Title: What size? Post by Krowl on 06/06/06 at 05:39:01 Sorry for beating this to death but I have a stock 95 and would like to do the carb mod. What size jet would you recommend and should I still do the half spacer? Any help would be much appreciated!!! |
Title: Re: What size? Post by vroom1776 on 06/06/06 at 08:04:40 are you going w/ a different exhaust and/or air intake? What altitude do you live at? Need answers to give you an answer! |
Title: Re: What size? Post by Krowl on 06/06/06 at 09:55:16 No I'm going to leave it stock. I live in PA so climate is not an issue. |
Title: Re: What size? Post by Reelthing on 06/06/06 at 10:09:07 If your staying with the stock pipe, pull the brass plug over the mixture and set it to 1 3/4 turns out from soft closed, a 147.5 main (with a 150 at the ready), and 1/2 the spacer is where I'd start. btw it's more the elevation to worry about than the climate |
SuzukiSavage.com » Powered by YaBB 2.2! YaBB © 2000-2007. All Rights Reserved. |