SuzukiSavage.com
/cgi-bin/YaBB.pl General Category >> Rubber Side Down! >> Screamin Eagle Install....... /cgi-bin/YaBB.pl?num=1149357546 Message started by Lil Em on 06/03/06 at 10:59:06 |
Title: Screamin Eagle Install....... Post by Lil Em on 06/03/06 at 10:59:06 Question? Does anyone out there know if there is a spacer that needs to go between the muffler and tailpipe? It doesn't seem like the clamp will hold it tight enough. Anyone? Thanks. Em |
Title: Re: Screamin Eagle Install....... Post by Guido on 06/03/06 at 11:31:11 I'd like to know too. I've got a slash cut on the way. E-bay seller sent it to the wrong address >:( been three weeks waiting on it. Didn't specify if it came with a spacer. |
Title: Re: Screamin Eagle Install....... Post by Fat Bastard on 06/03/06 at 11:43:35 Hi.. check this out.. I did install the baffle but it didn't work out well.. it came loose and went bananas inside the muffler.. so I had to take it out.... didn't like the KlinkKlinkKlinkKlink sound:) but I love the muffler.... without the baffle.. http://suzukisavage.com/cgi-bin/YaBB.pl?board=RubberSideDown;action=display;num=1139653960;start=8#8 |
Title: Re: Screamin Eagle Install....... Post by Max_Morley on 06/03/06 at 12:23:59 The 7" long 10 degree bend adapter yu have a muffler shop make takes care of the size differences and keeps the heat and soot off the rear brake lever assembly, Max |
Title: Re: Screamin Eagle Install....... Post by bacon13 on 06/03/06 at 17:42:21 anyone have a pic of the 7 inch pipe with the bend? |
Title: Re: Screamin Eagle Install....... Post by bacon13 on 06/03/06 at 21:08:58 Quote:
I found pic here if anyone else is looking. |
Title: Re: Screamin Eagle Install....... Post by smokey02 on 06/03/06 at 22:20:22 search for pipeheader.jpg I just had one made today, 7 inches long instead of 6. I'm getting ready to mount a HD turnout so I took a copy of this pic to the muffler shop to get it made. |
Title: Re: Screamin Eagle Install....... Post by smokey02 on 06/04/06 at 19:39:47 Well darn, It didn't fit, I'll have to have another one made. The next one will be straight 7 inches long (no 10 degree bend) and the flare at one end will be deeper but only 1 5/8 ID. Wish me luck LOL |
SuzukiSavage.com » Powered by YaBB 2.2! YaBB © 2000-2007. All Rights Reserved. |