SuzukiSavage.com
/cgi-bin/YaBB.pl General Category >> Rubber Side Down! >> Rear Drive Pully /cgi-bin/YaBB.pl?num=1149289878 Message started by Keith_B on 06/02/06 at 16:11:18 |
Title: Rear Drive Pully Post by Keith_B on 06/02/06 at 16:11:18 Is the rear drive pully on the old four speed bikes and the newer five speed bike the same, as in do they have the same number of teeth? |
Title: Re: Rear Drive Pully Post by Savage_Rob on 06/02/06 at 16:51:23 You might try the fiche at RonAyers.com and look at the part numbers between thw two models. |
Title: Re: Rear Drive Pully Post by Keith_B on 06/02/06 at 17:27:51 The part number is not the same, but that does not tell me the number of teeth, I am still looking for a higher gear but 5 is all thats there :( |
Title: Re: Rear Drive Pully Post by Savage_Rob on 06/02/06 at 17:39:07 Keith_B wrote:
I catch myself looking for 6th every now and again. |
Title: Re: Rear Drive Pully Post by Dorri Williams on 06/03/06 at 05:19:00 I have an '87 four speed bike. I'll try to remember to count teeth when I get home tonight and post. Dorri |
Title: Re: Rear Drive Pully Post by Dorri Williams on 06/03/06 at 07:15:25 Mine has 68 teeth. |
Title: Re: Rear Drive Pully Post by thumperclone on 06/03/06 at 12:42:51 1 tooth front = 3 teeth back |
Title: Re: Rear Drive Pully Post by Keith_B on 06/03/06 at 15:33:27 Thanks Dorri, :-[ now all Ihave to do is go count mine.LOL Thanks |
SuzukiSavage.com » Powered by YaBB 2.2! YaBB © 2000-2007. All Rights Reserved. |