SuzukiSavage.com /cgi-bin/YaBB.pl General Category >> Rubber Side Down! >> How do I fix the Tacho needle? /cgi-bin/YaBB.pl?num=1144189194 Message started by mpescatori on 04/04/06 at 15:19:54

Title: How do I fix the Tacho needle? Post by mpescatori on 04/04/06 at 15:19:54 Hi all, as I said in another thread in The Café, my tach did arrive in the end. However, after much TLC and (man)handling this side and that of the ocean, the tach's needle somehow skipped/jumped beyond the '0 rpm' per and currently reads at almost 6 o'clock. How do I fix this? Can it be fixed at all? I tried unscrewing the chrome bezel but it seems to be crimped tight. Maurizio

Title: Re: How do I fix the Tacho needle? Post by Desnick on 04/04/06 at 19:18:20 Had the same problem, thought I had done it in. But the next time a reved the bike out to high rpms the needle became unstuck. Give it a try.

Title: Re: How do I fix the Tacho needle? Post by Richard Amirault on 04/05/06 at 11:06:30 mpescatori wrote: Hi all, as I said in another thread in The Café, my tach did arrive in the end. However, after much TLC and (man)handling this side and that of the ocean, the tach's needle somehow skipped/jumped beyond the '0 rpm' per and currently reads at almost 6 o'clock. How do I fix this? Can it be fixed at all? I tried unscrewing the chrome bezel but it seems to be crimped tight. Maurizio Why are you changing your points of reference?  How do we know that "6 o'clock' is not anywhere near "0 rpm"? If you start with RPM than stay with RPM. If you start with a reference to clock position, then stay with reference to clock position.

SuzukiSavage.com » Powered by YaBB 2.2! YaBB © 2000-2007. All Rights Reserved.