SuzukiSavage.com - Print Page

SuzukiSavage.com
/cgi-bin/YaBB.pl
General Category >> Rubber Side Down! >> Saddlebag hard mount
/cgi-bin/YaBB.pl?num=1143920062

Message started by 911radioman on 04/01/06 at 11:34:22

Title: Saddlebag hard mount
Post by 911radioman on 04/01/06 at 11:34:22

Here is a pic of my quasi-hard mount saddlebags.

I used 2 3/8" rubber coated P-clamps, 1/4" fender washers, 1/4" x 20 machine screws, and 1/4" nylock nuts.

Bags still have a yoke on them to support downward weight pressure, and the two clamps merely fix the bags tight against the supports.

http://img.photobucket.com/albums/v692/911radioman/100_0733Small.jpg

Title: Re: Saddlebag hard mount
Post by SeattleSavage on 04/01/06 at 14:45:32

Looks good.

Title: Re: Saddlebag hard mount
Post by Ed_L. on 04/01/06 at 15:37:37

Looks great, I always wonder if my saddle bags are hanging out in the wind when cruising on the highway. The "P" clamp holds the bag tight so they don't blow around at speed, nice job :D

Title: Re: Saddlebag hard mount
Post by Steve530 on 04/02/06 at 00:42:00

Good job, Tom.