SuzukiSavage.com - Print Page

SuzukiSavage.com
/cgi-bin/YaBB.pl
General Category >> Rubber Side Down! >> How you should NOT do it.
/cgi-bin/YaBB.pl?num=1142262768

Message started by Kropatchek on 03/13/06 at 07:12:48

Title: How you should NOT do it.
Post by Kropatchek on 03/13/06 at 07:12:48

INformative pictures how you should NOT use the silicone putty when installing the valve cover.
At the yellow arrow there's so much sealant that the oil supply channel was blocked resulting in failure of the camshaft bearing surface.

http://www.ls-650.de/community/forum/YaBB.pl/YaBB.pl?board=Technik;action=display;num=1142250257

No comment for the red arrow, speaks for itself.

Greetz
Kropatchek 8)

Title: Re: How you should NOT do it.
Post by lancer on 03/13/06 at 07:25:30

WOW, somebody REALLY LIKES THE RED STUFF!! :o

Title: Re: How you should NOT do it.
Post by Kropatchek on 03/13/06 at 07:35:26

When the camchain jumps a tooth, what will happen if the adjuster piston is out of the cilinder; there's the result:

http://www.ls-650.de/community/forum/YaBB.pl/YaBB.pl?board=Technik;action=display;num=1140946490

Interesting forum, huh?

Greetz
Kropatchek 8)( sun is shining but temp. brrrrrrrrrrrrr, 3degr C

Title: Re: How you should NOT do it.
Post by DangMan on 03/13/06 at 09:39:28

That must suck like nothing have ever sucked !