SuzukiSavage.com
/cgi-bin/YaBB.pl General Category >> Rubber Side Down! >> ? about Superbrace /cgi-bin/YaBB.pl?num=1140413205 Message started by mmosel on 02/19/06 at 21:26:45 |
Title: ? about Superbrace Post by mmosel on 02/19/06 at 21:26:45 The Superbrace for the Savage says that it's for 2001 & 2002 models. Is there any reason it wouldn't work for a 2005 model? |
Title: Re: ? about Superbrace Post by Steve530 on 02/19/06 at 21:46:55 Or pre-2001 models for that matter? |
Title: Re: ? about Superbrace Post by Reelthing on 02/19/06 at 22:30:38 work fine as long as you do not have the fork guards |
Title: Re: ? about Superbrace Post by mmosel on 02/20/06 at 00:07:24 So if you have them, and remove them, would it then work? Anyone know what's involved in removing them? |
Title: Re: ? about Superbrace Post by babbalou on 02/20/06 at 00:14:43 mmosel wrote:
I cut mine off using a boxcutter so I could install my fork gators. They're hard plastic. |
Title: Re: ? about Superbrace Post by Savage_Rob on 02/20/06 at 05:53:15 My 98 didn't have the guards and the Superbrace fit perfectly. |
Title: Re: ? about Superbrace Post by Ed_L. on 02/20/06 at 05:59:32 Same with my '02, took about ten minutes to install. |
Title: Re: ? about Superbrace Post by Savage_Rob on 02/20/06 at 06:16:43 Ed_L. wrote:
And that was including a beer break. |
Title: Re: ? about Superbrace Post by HDI_IA on 02/20/06 at 08:58:53 The Superbrace fit my '96 perfectly.....wow what a difference in ride too ;) |
Title: Re: ? about Superbrace Post by Steve530 on 02/20/06 at 12:48:45 Dumb question here - what's a fork guard? |
Title: Re: ? about Superbrace Post by Dynobob on 02/20/06 at 14:11:37 Steve530 wrote:
It's a metal or plastic piece that covers the front of the fork tubes. It keeps road debris and bugs off the fork tubes where they contact the seals. This extends the life of the seals. New Savages have them stock and it's an optional piece that screws to the Superbrace. |
Title: Re: ? about Superbrace Post by Steve530 on 02/20/06 at 17:06:35 Thanks. It's not the black plastic piece between the tubes which I believe are seals, then. |
Title: Re: ? about Superbrace Post by mmosel on 02/20/06 at 17:49:10 Has anyone successfully installed a Superbrace on an 05 or 06 S40? I was looking at my forks today, and even with removing the guards, it doesn't look like there is clearance above the fender for the brace. ??? |
Title: Re: ? about Superbrace Post by Dynobob on 02/21/06 at 03:49:13 Steve530 wrote:
http://members.cox.net/rachtheace2/savage.jpg |
Title: Re: ? about Superbrace Post by Ed_L. on 02/21/06 at 06:18:42 The brace has a slight curve to it to clear the front fender. |
Title: Re: ? about Superbrace Post by Steve530 on 02/21/06 at 08:53:54 Dynobob wrote:
Thanks, Bob. My 97 definitely does not have those. |
Title: Re: ? about Superbrace Post by Savage_Rob on 02/21/06 at 09:05:11 And they have them in stainless to add to the Superbrace also... but they ain't cheap at $25. http://www.superbrace.com/images/products/6001.Fork.Protectors.Chrome.jpg |
SuzukiSavage.com » Powered by YaBB 2.2! YaBB © 2000-2007. All Rights Reserved. |