SuzukiSavage.com - Print Page

SuzukiSavage.com
/cgi-bin/YaBB.pl
General Category >> Rubber Side Down! >> Resurrection is sweet
/cgi-bin/YaBB.pl?num=1139444516

Message started by torque on 02/08/06 at 16:21:56

Title: Resurrection is sweet
Post by torque on 02/08/06 at 16:21:56

well after about three months of not having suzi,i finally finished the rebuild.she runs better than ever before.
i put in new clutch plates,cam shaft,cam chain,honed the cylinder,piston rings,and clutch springs.i think that was all ::) o, all new bolts too. i finally got to try out my 3 foot sissy bar,it works great,i can carry a couple cases and three helmets on it...will post pics when i get a chance.

but yeah its tire fryer now ;D all i need is warm weather damm it. :P

Title: Re: Resurrection is sweet
Post by Savage_Rob on 02/09/06 at 08:22:24

torque wrote:

i finally got to try out my 3 foot sissy bar,it works great,i can carry a couple cases and three helmets on it.

Now that's one thing I really want to do.

Title: Re: Resurrection is sweet
Post by bobtreat on 02/09/06 at 12:56:47

Was it a stock cam u put in or one from Web Cams? What was the lift - duration if aftermarket.I'm in the process of doing mine. ;D

Title: Re: Resurrection is sweet
Post by torque on 02/09/06 at 13:26:35

it's the stock cam,with valve adjustment set too .003

my old cam was looking pretty rough,but oddly the valve lifters/rockers where not worn at all :o

are u going to bore out the cylinder or just hone it like i did?

Title: Re: Resurrection is sweet
Post by bobtreat on 02/09/06 at 16:10:14

I hav'nt really decided I think I'd like to bore it,but hav'nt found a machine shop to talk to about boring.
May just send the cam out for a regrind this year, an do the cylinder next winter.Progressivly add power not do it all at once. ???The head is almost off an i'll take that out to the shop for port an polish job.

Title: Re: Resurrection is sweet
Post by torque on 02/09/06 at 16:27:46

that sounds like a good plan too me ;)