SuzukiSavage.com
/cgi-bin/YaBB.pl General Category >> Rubber Side Down! >> JETTING AN AMAL 36mm CARB /cgi-bin/YaBB.pl?num=1132322343 Message started by CAPTAIN-DISASTER on 11/18/05 at 05:59:03 |
Title: JETTING AN AMAL 36mm CARB Post by CAPTAIN-DISASTER on 11/18/05 at 05:59:03 Would like to hear feedback from anyone that did re-jetting/mods of an Amal 36mm carb. Changed the pilot jet on mine & it brought air/idle screw from 3+ turns out to about 1 1/2 turns. Carb seems to perform well enough. Always (before & after pilot jet change) had bubbling/backfiring at closed throttle, between shifts, full deacceleration, when turning bike off. Has anyone dealt with these issues with any any degree of success? |
SuzukiSavage.com » Powered by YaBB 2.2! YaBB © 2000-2007. All Rights Reserved. |