SuzukiSavage.com
/cgi-bin/YaBB.pl General Category >> Rubber Side Down! >> Foot pegs /cgi-bin/YaBB.pl?num=1132263063 Message started by FlyingJLady on 11/17/05 at 12:42:49 |
Title: Foot pegs Post by FlyingJLady on 11/17/05 at 12:42:49 I have a 2004 Suzuki Savage 650 that I purchased from a private party. The first owner laid it down and bent the passagenger foot pegs. When I purchased the bike it had a new peg to put on the bike. My question is how to get the old ones off so I can put the new one on? Is there a special tool that I have to use? Any help on this would great. FJL |
Title: Re: Foot pegs Post by torque on 11/17/05 at 15:29:56 both pegs(left and right ) are each held on by only one allen screw,which i believe are metric. there may be a chrome cover on the screw,just pop it off with a pocket knife. |
Title: Re: Foot pegs Post by lancer on 11/17/05 at 20:02:06 The allen head bolts that hold the passenger pegs are screwed in from the INSIDE of the swingarm. It is a bit of a challenge to get to them without taking the rear wheel off. |
Title: Re: Foot pegs Post by FlyingJLady on 11/17/05 at 21:58:08 thanks, will check that out. :) |
Title: Re: Foot pegs Post by torque on 11/18/05 at 05:14:40 lancer wrote:
your right .... :-[i don't knoy why, but i thought flyingjlady was talking about the drivers pegs...when she clearly said passenger ::) |
Title: Re: Foot pegs Post by FlyingJLady on 11/18/05 at 08:37:47 Yeek, sounds like a tough job. Thats probally why the previous owner didn't put it on. I guess thats something my husband and I'll have to decide on. |
SuzukiSavage.com » Powered by YaBB 2.2! YaBB © 2000-2007. All Rights Reserved. |