SuzukiSavage.com - Print Page

SuzukiSavage.com
/cgi-bin/YaBB.pl
General Category >> Rubber Side Down! >> PERFORMANCE CAM
/cgi-bin/YaBB.pl?num=1130875248

Message started by lancer on 11/01/05 at 11:54:05

Title: PERFORMANCE CAM
Post by lancer on 11/01/05 at 11:54:05

Someone asked about a performance cam for the Savage, but I could not find them on the forum after I looked up the info for the site.

The place to go for a performance cam is "Web Cam Racing Cams". The website is www.webcamshafts.com. They do not have any on the shelf but will take your cam and regrind it for you...from mild to wild...your choice. They are quick and very reasonable with their costs.

They list the "regrind" on a DR650 cam at $148, for example.

Title: Re: PERFORMANCE CAM
Post by Max_Morley on 11/02/05 at 14:11:47

I also have a vague recollection of a shop in or near Vancover BC that will regrind your cam. And there should be some places in Scandanavia as they ice race them there. Too bad so much of that history got lost off Bert's forum. Maybe Susan or Jon's could make contact with Bert and see if he can send the archieved material over to put on this site. I think Bert's is down for the count. Max

Title: Re: PERFORMANCE CAM
Post by Greg_650 on 11/05/05 at 05:48:53

And how did you have yours reground. Mild or wild?
???

Title: Re: PERFORMANCE CAM
Post by [Rob] on 11/05/05 at 07:44:21

Greg_650 wrote:

And how did you have yours reground. Mild or wild?
???

I was gonna ask if it was ground for flat or cone filter.

Title: Re: PERFORMANCE CAM
Post by Greg_650 on 11/05/05 at 07:58:28

[Rob] wrote:

I was gonna ask if it was ground for flat or cone filter.

Espresso grind?