|
SuzukiSavage.com
/cgi-bin/YaBB.pl General Category >> Rubber Side Down! >> which spacer ? /cgi-bin/YaBB.pl?num=1127238936 Message started by sean franchi on 09/20/05 at 10:55:36 |
|
Title: which spacer ? Post by sean franchi on 09/20/05 at 10:55:36 the clymer manual has an exploded view of a carb. it shows 2 different spacers. one is inder the diaghram and the other is on some shaft that looks horizontal. which is the spacer to remove/change to richen ? |
|
Title: Re: which spacer ? Post by Savage_Rob on 09/20/05 at 11:26:45 The white spacer is on the needle which is vertically oriented below the diaphragm. |
|
Title: Re: which spacer ? Post by Dynobob on 09/20/05 at 15:41:01 sean franchi wrote:
Here's an excellent pic by Greg: http://suzukisavage.com/images/uploaded/JetsEtc01web.jpg It's #4 in this parts diagram: http://suzukisavage.com/images/uploaded/Mikuni_101web.jpg Here's the thread (found in the technical section here): http://suzukisavage.com/cgi-bin/YaBB.pl?board=tech;action=display;num=1098869040 |
|
Title: Re: which spacer ? Post by sean franchi on 09/21/05 at 07:09:35 Thank you very much to both repliers. I am going to tackle the project tonight. franch |
|
SuzukiSavage.com » Powered by YaBB 2.2! YaBB © 2000-2007. All Rights Reserved. |