SuzukiSavage.com - Print Page

SuzukiSavage.com
/cgi-bin/YaBB.pl
General Category >> Rubber Side Down! >> IDLE MIXTURE SCREW
/cgi-bin/YaBB.pl?num=1109786933

Message started by marty62253 on 03/02/05 at 10:08:53

Title: IDLE MIXTURE SCREW
Post by marty62253 on 03/02/05 at 10:08:53

I WAS GOING TO ADJUST IDLE MIXTURE - SO I THOUGHT.
PILOT SCREW COVER ALREADY REMOVED (PRIOR TO MY GETTING THIS BIKE).
HEAD OF SCREW IS STRIPPED - I CAN HARDLY GET ANY GRIP ON IT.
1-IS THIS SCREW EASILY REPLACED??
2-WHERE WOULD I GET ONE? - LOCAL DEALERSHIP NO HELP ON THIS ONE.....SCHEMATIC SHOWS THIS PART AS DISCONTINUED.
??? :'( ???
MARTY

Title: Re: IDLE MIXTURE SCREW
Post by Nightrain on 03/02/05 at 10:28:46

1. back the screw all the way out. (dont lose the spring)
2. Remove the screw
3. Use a dremmel tool with the smallest circular cutting blade you can find.
4. Cut a new slice in the top of screw and you'll be good to go. The only part of the screw that is functional is the tip (the part inside the carb) and the spring.

May the force be with you ;)