SuzukiSavage.com
/cgi-bin/YaBB.pl General Category >> Rubber Side Down! >> Front seat mod - again /cgi-bin/YaBB.pl?num=1107913600 Message started by Durandal on 02/08/05 at 17:46:40 |
Title: Front seat mod - again Post by Durandal on 02/08/05 at 17:46:40 I did search for this topic, I swear, but the forum kept returning no results. Can someone here give me the details on this. What size washers and bolt to use? How much did you change the height of the seat? Many thanks. |
Title: Re: Front seat mod - again Post by diesel on 02/08/05 at 21:58:19 I used 13mm(.520} longer bolts and black hose washers. up slightly over 1/2in. in front. mabey next time, will use 25mm(1in).longer. trial and error, ya know. |
Title: Re: Front seat mod - again Post by Kropatchek on 02/09/05 at 05:30:02 diesel wrote:
And the bolts are M6 ( 6mmx1mm pitch) to be precise. greetz K ;Kropatchek ;D |
Title: Seat Mod Post by savagethumper on 02/18/05 at 17:32:06 I used an M6 bolt about 2-2.5 inches long. I put a couple nuts on them to take up space, and it lifted the front of the seat about an inch and a half. Makes a world of difference. And you can hardly tell it's been modified. http://predator.bikepics.com/pics/suzuki-savage-01-bikepics-294319.jpg |
SuzukiSavage.com » Powered by YaBB 2.2! YaBB © 2000-2007. All Rights Reserved. |