SuzukiSavage.com
/cgi-bin/YaBB.pl General Category >> Rubber Side Down! >> Master cylinder, size ? /cgi-bin/YaBB.pl?num=1098028414 Message started by klx650sm2002 on 10/17/04 at 08:53:34 |
Title: Master cylinder, size ? Post by klx650sm2002 on 10/17/04 at 08:53:34 Does anyone know the bore size of the front master size, don't have my manual yet. Thanks in advance. Clive W :D |
Title: Re: Master cylinder, size ? Post by Greg_650 on 10/18/04 at 02:30:00 I really don't know. What you gonna do? |
Title: Re: Master cylinder, size ? Post by klx650sm2002 on 10/18/04 at 06:43:53 Probably get one off a scooter. Clive W :D |
Title: Re: Master cylinder, size ? Post by Kropatchek on 10/19/04 at 08:44:25 Did the measurement for you on my spare unit. Its 12.7 mm or for you non-metric guys and dolls: ;D half an inch ( 1/2 ") Glad to be of service Greetz Kropatchek |
Title: Re: Master cylinder, size ? Post by klx650sm2002 on 10/19/04 at 09:34:55 Thanks Kropatchek, My standard m/cyl is 1/2" and I am looking to try a 10mm but might end up with an 11mm. Clive W :D |
Title: Re: Master cylinder, size ? Post by Greg_650 on 10/20/04 at 02:59:52 klx650sm2002 wrote:
Why ??? |
Title: Re: Master cylinder, size ? Post by klx650sm2002 on 10/20/04 at 03:17:44 If you go from a 1/2" to 11mm m/cyl you get a 33% increase in line presure for the same force on the lever, the drawback is more lever travel. Clive W :D |
Title: Re: Master cylinder, size ? Post by klx650sm2002 on 10/25/04 at 06:46:52 If you go from 1/2" to 10mm you get 61.29% more line pressure for the same lever pressure. Clive W :D |
Title: Re: Master cylinder, size ? Post by Greg_650 on 10/25/04 at 06:54:37 What are you wanting to achieve? More piston pressure to clamp the caliper harder or a more gradual feel for the braking. |
Title: Re: Master cylinder, size ? Post by klx650sm2002 on 10/25/04 at 07:00:03 More clamping pressure for the same lever pressure. Clive W :D |
Title: Re: Master cylinder, size ? Post by Greg_650 on 10/25/04 at 07:06:22 But as you said, the lever travel will be greater....with the same brake caliper. What if the volume of the KLX caliper is too large for the travel? |
Title: Re: Master cylinder, size ? Post by klx650sm2002 on 10/25/04 at 07:44:33 With the lever travel increaceing I might find the need to go to 11mm. Clive W :D |
SuzukiSavage.com » Powered by YaBB 2.2! YaBB © 2000-2007. All Rights Reserved. |