SuzukiSavage.com - Print Page

SuzukiSavage.com
/cgi-bin/YaBB.pl
General Category >> Rubber Side Down! >> engine dimensions
/cgi-bin/YaBB.pl?num=1093450647

Message started by motorhead on 08/25/04 at 09:17:27

Title: engine dimensions
Post by motorhead on 08/25/04 at 09:17:27

I would like to know the height of the engine from the base of the motor/tranny to the top of the head, I believe this is the highest point. I would also like to know the length of the motor, from the front of the head to the back of the tranny. Thanks

Title: Re: engine dimensions
Post by motorhead on 08/26/04 at 11:59:50

Surely one of you could take a tape measure with you when you polish your bike and get a couple of measurements. (?) :)

Seriously, I don't have access to one or I wouldn't be asking.

After I went through the consideration of getting a street bike, somehow I just realized its just not for me, right now. I however, have gained a huge interest in atc/atv's, I am cleaning up an old honda 70 three wheeler now and have an off brand three wheeler that originally came with a 8hp briggs and straton engine, that currently has no engine. The three wheeler is huge and built pretty strong, so given my experience looking over this site and at the thumper engine, I put two and two together and thought, wonder if one of those would fit...a 650cc single piston three wheeler sounds good to me. Thought I better get some dimensions first just to be on the safe side. Then there is the process of waiting for one to come along at a good price. Thanks

Title: Re: engine dimensions
Post by Greg_650 on 08/26/04 at 14:58:37

I saw this bofore but I didn't have time to answer. As well, I have a Savage engine and a tape measure, but they haven't been in the same place at the same time ::)

Anyway, I'll try to work up some dimensions this weekend when I do some tinkering. I have a bare engine photo and if I have time, I'll layer them on there as well. You'd probably like the engine mount dimensions too.

Hang in there. I'd like to see a 3 wheeler or even a go-cart with a Savage engine :o

Title: Re: engine dimensions
Post by motorhead on 08/26/04 at 16:34:31

Appreciate it....figured I should state the reason for the dimensions or everyone might think I was asking a silly question...might still..but at least now it makes some sense. :) Thanks

Title: Re: engine dimensions
Post by Greg_650 on 08/29/04 at 04:16:59

Okay. Here it is. Not the prettiest piece of work with a cut and paste with Adobe, but you'll get the idea anyway.

These dimensions are approximate because I had to measure around pipes and pegs, etc. But I imagine that you'll have to make engine mounts that are somewhat adjustable anyway....

http://216.77.188.54/coDataImages/p/Groups/215/215131/folders/156326/1207594650EngineSize01web.jpg

Title: Re: engine dimensions
Post by motorhead on 08/29/04 at 10:26:31

Appreciate it...couldn't get much more specific short of having it in front of me. Thanks again

Title: Re: engine dimensions
Post by axa on 11/07/13 at 16:44:11

I need these dimensions as well, nothing attached to this post, anyone have the measurements?

Title: Re: engine dimensions
Post by Gerry on 11/08/13 at 09:42:02

7F667F1E0 wrote:

I need these dimensions as well, nothing attached to this post, anyone have the measurements?

HTH
Gerry

http://i669.photobucket.com/albums/vv55/lotus23bsr/Public%20Album/DSCN0795_zpsd5b78862.jpg

http://i669.photobucket.com/albums/vv55/lotus23bsr/Public%20Album/DSCN0792_zps5c518dfb.jpg

Title: Re: engine dimensions
Post by axa on 11/08/13 at 09:51:06

Wonderful. Thanks

Title: Re: engine dimensions
Post by justin_o_guy2 on 11/09/13 at 17:02:03

Those are interesting measurements,, but the one that matters is the Six Hunnert & Fiftee TWO See Sees..