|
SuzukiSavage.com
/cgi-bin/YaBB.pl General Category >> Rubber Side Down! >> HORSE POWER /cgi-bin/YaBB.pl?num=1069444718 Message started by AL_DOWN_UNDER on 11/21/03 at 11:58:38 |
|
Title: HORSE POWER Post by AL_DOWN_UNDER on 11/21/03 at 11:58:38 HEY SAVAGE OWNERS . I HAVE A 86 IN AUSIE LAND THEY HAVE NOT BEEN IMPORTED HERE SCINE 1989.ANY WAY DOES ANY ONE KNOW HOW MUCH B.H.P. THEY HAVE . I HAVE CHECK 2 MANUALLS OUT AND NO IMFO 8) |
|
Title: Re: HORSE POWER Post by festus on 02/12/04 at 09:50:04 stock they have about 28 HP. |
|
Title: Re: HORSE POWER Post by Richard fssnoc#4368(KS) on 02/12/04 at 12:38:36 Richard fssnoc#4368(KS) wrote:
|
|
Title: Re: HORSE POWER Post by Gregski on 02/12/04 at 13:25:10 Richard I am a computer guy, and I too am not a big fan of this FORUM format, some times less means more. It took me a week to figure out how to log in, (can you say Case SeNsiTive) and as far as the Yahoo groups, I tried to join one, and the guy kept asking for my personal info, and it was all right there... I wish there was only one SIMPLE place to yap about the good ol' Savage! |
|
Title: Re: HORSE POWER Post by ironman on 02/12/04 at 14:09:57 31 is what I believe is right. |
|
Title: Re: HORSE POWER Post by Kropatchek on 02/13/04 at 03:55:47 ;D Hi down under. I found a partdealer in Germany that has a list of Savages imported to Germany. ::) Maybe this can be of use to you. Here the link http://s-mot.de/shop/modellsuche.php?step=3&hersteller=SUZUKI&modell=LS&hubraum=650 If you need help with translating , drop me an e-mail kropatchek@wanadoo.nl Greetings :D |
|
Title: Re: HORSE POWER Post by reggae.iceman on 03/03/04 at 11:45:57 had my 87 dyno,ed a couple of years back,was a steady 30 with a blip to 32 for some reason. |
|
Title: Re: HORSE POWER Post by geo on 01/18/08 at 22:40:36 When you make the mods below, you can get up to 35hp. You must redeisign the cylinder head to do better. |
|
Title: Re: HORSE POWER Post by klx650sm2002 on 01/19/08 at 01:00:41 http://i119.photobucket.com/albums/o147/klx650sm2002/horsepower3.jpg Both rejetted. Clive W :) |
|
Title: Re: HORSE POWER Post by justin_o_guy2 on 01/19/08 at 03:06:56 Just Haaaad to stick the KLX curve in there, didn ya??? |
|
Title: Re: HORSE POWER Post by LANCER on 01/19/08 at 04:50:29 Clive has always been proud that he has a BIG'N :D |
|
Title: Re: HORSE POWER Post by Savage_Greg on 01/19/08 at 06:34:48 73484249405345014752524F4E420215121719096A7208210 wrote:
[/quote] Hey! A lurking Fizzknocker. Cool. #4666 here...Welcome aboard. |
|
Title: Re: HORSE POWER Post by barry68v10 on 01/19/08 at 06:36:23 5F525D5056410104330 wrote:
Yes, but will Clive admit he has a shorter stroke?!? :D |
|
Title: Re: HORSE POWER Post by Savage_Greg on 01/19/08 at 06:36:30 796660677A7D4C7C4C74666A21130 wrote:
If you get ya a red and black pen, you could make an even better one ;D |
|
Title: Re: HORSE POWER Post by klx650sm2002 on 01/20/08 at 00:44:24 Yes my stroke is only 83mm. Clive W :'( |
|
Title: Re: HORSE POWER Post by Savage_Greg on 01/20/08 at 07:03:11 5B5C48060500435D02000002300 wrote:
Some say that is isn't the stroke that counts ;D |
|
Title: Re: HORSE POWER Post by Savage_Greg on 01/20/08 at 07:04:22 Just curious. How come AL_DOWN_UNDER is an Ex Member? |
|
Title: Re: HORSE POWER Post by T Mack 1 on 01/20/08 at 08:02:58 0B3E292B137A797C4C0 wrote:
The original post is old, Nov 03. In both the old forum and in the new style, you have the ability to delete your profile. The nature of forums, they log replies and the entry normally keep the ussr ID. I would think that the Ex-Member is the way it shows when someone deletes their profile..... |
|
Title: Re: HORSE POWER Post by barry68v10 on 01/20/08 at 11:26:33 2324307E7D783B257A78787A480 wrote:
That's one of the reasons the Savage slightly "outperforms" the KLX below 4000 rpms, but gets crushed above 4000 rpms... A 94mm stroke vs. 83mm creates quite a bit more peak piston speed. Even though I'd guess the 94mm Suzuki piston is lighter than the 100mm Kawi piston, that doesn't compensate for the difference in peak piston speed. Anyone know the length of the Savage connecting rod? Clive, do you know the length of the Kawi connecting rod? |
|
Title: Re: HORSE POWER Post by klx650sm2002 on 01/21/08 at 02:03:00 Can not find rod length but KLX mean piston speed is 20.75 m/s @ 7500 (red line)and Savage mean piston speed is 20.37 m/s @ 6500. Clive W :) |
|
Title: Re: HORSE POWER Post by Savage_Greg on 01/21/08 at 23:27:13 Just need to drag out the old calculator with (Pi R2) x Stroke = 650 cc formula. Work it backwards with the bore and displacement to get a good guess at the stroke... It's elementary...:P |
|
Title: Re: HORSE POWER Post by Reelthing on 01/22/08 at 13:07:23 pies are round not square |
|
Title: Re: HORSE POWER Post by vroom1776 on 01/22/08 at 14:54:37 457E747F76657337716464797874342324212F3F5C443E170 wrote:
[/quote] The manufacturer's certificate of Origin? How hard was that to get? |
|
SuzukiSavage.com » Powered by YaBB 2.2! YaBB © 2000-2007. All Rights Reserved. |